Dolphin 3040H Specification

The combination of fast update speed and high resolution scanning of the Dolphin Real Time Hybrid Sonar sets unprecedented flexibility for Underwater Vehicle operators.

The compact, rugged underwater unit weighs only 2.5kg in water allowing the system to be integrated with the smallest of Remote Vehicles. The unit has a standard thirteen pin connector; six pins are used for telemetry and comms data, two for video signal and two for 24v d.c. Power. At the surface the sonar output is routed through a discrete USB interface unit. The USB unit contains the data acquisition hardware to convert the video telemetry uplink into a high speed digital data stream.The system software can be run on virtually any modern "Windows" P.C and is ideally suited to the portability of a notebook P.C provided that the system has at least one USB port. By using optimised display techniques the high speed real time display for the electronically scanning sonar is generated at up to 30 frames per second.

The operator, utilising the huge speed advantage of the electronically scanned system, can pilot the Vehicle using the system software’s real-time “pseudo perspective” mode before switching to the high accuracy mechanically scanned system for close-up inspection of mid water objects and targets in a 360° swath. The Raw data obtained may be logged automatically (at programmed intervals), or on demand, to hard disk for post analysis of survey results. Sonar images may also be incorporated into reports or pasted into other "Windows" applications .

The Dolphin USB Interface unit will operate at full speed when connected to a USB 2.0 port but will also operate at a reduced frame rate when connected to a USB 1.1 port .As the USB Interface is powered from the USB port the system lends itself to being used with a notebook PC.



Dolphin 3040H:

Electronically Scanning Specifications

Operating Frequency:
Range Settings:
Range Resolution:
Sector scanned:
Angular Resolution:
Horizontal Beamwidth:

Vertical Beamwidth:

Update Rate (120° Sector):



Data Logging:

Transmit Pulse Length:
Transmit Power:
Telemetry Link:


USB Interface Unit

Dimensions:


Protocol:
Power Supply:

Input Data Format:




250kHz
10m to 200m in 10m steps
>35mm
120°

Receive: 4°(+/-3dB points)
Transmit: 120°
Receive: 16°
Transmit: 12°
10m range, 30 frame/sec
20m range, 28 frame/sec
50m range, 14 frame/sec
100m range, 7 frame/sec
Auto at variable frame rate
Manual, key press on demand
30usec to 1ms
Variable
19200 baud half duplex




Width: 110mm
Depth: 165mm
Height: 35mm
USB 1.1 and USB 2.0
+5V DC at 200mA typical
(self-powered from USB port)
Video (+/-1V peak)

Mechanically Scanning Specification

Acoustic Frequency:
Horizontal Beamwidth:
Vertical beamwidth:
Transmit Pulse Length:
Transmit Power:
Receive Sensitivity:
Range Resolution:
Telemetry Link:
Data Rate:
Protocol:


Underwater Unit

Dimensions:

Weight:
Material:


Power Supply:
Temperature

Operating Depth:

Underwater Connector:




500KHz
1.25° (-3db half angle)
+/-10° about horizontal
60/300/600 usec
186dB re 1uPa/V at 1m
5uV r.m.s.
42mm
Isolated RS485
115200 baud
Asynchronous packet protocol




Diameter: 160mm
Length: 230m
3.5kg in air 2.5kg in water
Hard Anodised Aluminium
uPVC

24V DC at 2.6A max
Operating: 0 to 40°C
Storage: -20 to +60°C
500m

Burton 5506=2013-AL

Copyright © 2013. Marine Electronics Ltd.