Image Profiling Sonar 1640 / 2640 Specification

Marine Electronics Model 1640 Imaging Sonar

The Model 1640 Sonar provides high resolution sonar images in a transportable PC format for the minimum cost.Typical applications include ROV navigation, sea and riverbed imaging, debris clearance, target location and tracking.The standard Model 1640 operates at 500kHz with a 2.5 horizontal beamwidth and a 20 vertical beamwidth. Alternative transducers may be fitted to give different beam patterns and the acoustic frequency re-tuned in the range 100kHz to 2MHz. This flexibility allows Marine Electronics to provide custom solutions to solve specific problems foran "off-the shelf" price.

Marine Electronics Model 2640 Profiling Sonar

The Model 2640 Profiling Sonar effectively operates as a "first return" scanning echo-sounder. The standard unit operates at 700kHz with a 2.5 conical beam to give precise range and bearing information over the scanned area. Typical applications are dredging and trenching operations, river and sea bed profiling and pipe laying. Multiple 2640 units may be connected together to cover either a larger area or for trenching a before and after comparison may be displayed simultaneously. As with the Model 1640 Imaging Sonar alternative transducers may be fitted to customise the beam pattern.

Mechanical

Length:
Diameter:
Finish:
Operating Depth:
Mating Connector:
Operating Temp:
Storage Temp:
Weight in Air:
Weight in Water:
Power Requirements:


Acoustic

Acoustic Frequency:
Horizontal Beamwidth:
Vertical Beamwidth:
Transmit Pulse Width:
Transmit Power:
Receive Sensitivity:
Range Resolution:

Power Supply and Interface Unit

Length:
Width:
Height:
Material:
Scanner Connector:
P.C. Connector:
Mains Connector:

Input Supply Voltage:
Output Voltage:
Telemetry Interface:



230mm
70mm
Hard Anodised Aluminium
1000m standard, 3000m optional
FAWL-5S-MP(Sea Conn.)
0°C to +40°C
-20°C to +70°C
2.3kg
1.4kg
24-36VDC at 400mA cont. 2A
peak



500kHz
1.25°(-3dB half angle)
+/-10° about horizontal
60/300/600 µsec
186dB re 1µPa/V at 1m
5µV r.m.s.
42mm




230mm
100mm
110mm
Sealed die-cast aluminium box
Amphenol 62GB12-10S
9 way female 'D'-type
IEC fused filtered inlet with switch
90VAC to 250 VAC
Isolated 28VDC nominal at 2A
RS232 to optically isolated
RS485

Mechanical

Length:
Diameter:
Finish:
Operating Depth:
Mating Connector:
Operating Temp:
Storage Temp:
Weight in Air:
Weight in Water:
Power Requirements:


Acoustic

Acoustic Frequency:
Horizontal Beamwidth:
Transmit Pulse Width:
Transmit Power:
Receive Sensitivity:
Range Resolution:



Telemetry

Type:
(Factory Option)

Data Rate:
Protocol:
Cable Drive Capability:
Preffered Cable Type



275mm
70mm
Hard Anodised Aluminium
1000m standard, 3000m (optn.)
FAWL-5S-MP(Sea Conn.)
0°C to +40°C
-20°C to +70°C
2.5kg
1.4kg
24-36VDC at 400mA cont. 2A
peak



700kHz
1.25°(-3dB half angle)
50 µsec
186dB re 1µPa/V at 1m
5µV r.m.s.
5mm





1: Isolated RS485
2: RS232 seperate Rx/Tx
3: TTL seperate Rx/Tx
115200 baud
Asynchronous packet protocol
1000m standard, 3000m (optn.)
26 s.w.g. or larger twisted pair
with uncommitted screen

Copyright © 2018. Marine Electronics Ltd.